The DSPSR2 characteristics are:
Holds the saved process state for Debug state. On entering Debug state, PSTATE information is written to this register. On exiting Debug state, values are copied from this register to PSTATE.
AArch32 System register DSPSR2 bits [31:0] are architecturally mapped to AArch64 System register DSPSR_EL0[63:32].
This register is present only when FEAT_Debugv8p9 is implemented and AArch32 is supported. Otherwise, direct accesses to DSPSR2 are UNDEFINED.
DSPSR2 is a 32-bit register.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RES0 | PPEND | RES0 | |||||||||||||||||||||||||||||
Reserved, RES0.
PMU Profiling exception pending bit. Set to the value of PSTATE.PPEND on entering Debug state, and conditionally copied to PSTATE.PPEND on exiting Debug state.
The reset behavior of this field is:
Reserved, RES0.
Reserved, RES0.
Accesses to this register use the following encodings in the System register encoding space:
| coproc | opc1 | CRn | CRm | opc2 |
|---|---|---|---|---|
| 0b1111 | 0b011 | 0b0100 | 0b0101 | 0b010 |
if !(IsFeatureImplemented(FEAT_Debugv8p9) && HaveAArch32()) then UNDEFINED; elsif !Halted() then UNDEFINED; else R[t] = DSPSR2;
| coproc | opc1 | CRn | CRm | opc2 |
|---|---|---|---|---|
| 0b1111 | 0b011 | 0b0100 | 0b0101 | 0b010 |
if !(IsFeatureImplemented(FEAT_Debugv8p9) && HaveAArch32()) then UNDEFINED; elsif !Halted() then UNDEFINED; else DSPSR2 = R[t];
19/09/2024 21:50; f38fb98db05c9431684175106ec86e1bac8166e3
Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.