AArch32 Registers
AArch64 Registers
AArch32 Instructions
AArch64 Instructions
Index by Encoding
External Registers
External Registers by Offset
Registers by Functional Group
Proprietary Notice

CTIAPPSET, CTI Application Trigger Set register

The CTIAPPSET characteristics are:

Purpose

Sets the application triggers.

Configuration

CTIAPPSET is in the Debug power domain.

Attributes

CTIAPPSET is a 32-bit register.

Field descriptions

313029282726252423222120191817161514131211109876543210
APPSET31APPSET30APPSET29APPSET28APPSET27APPSET26APPSET25APPSET24APPSET23APPSET22APPSET21APPSET20APPSET19APPSET18APPSET17APPSET16APPSET15APPSET14APPSET13APPSET12APPSET11APPSET10APPSET9APPSET8APPSET7APPSET6APPSET5APPSET4APPSET3APPSET2APPSET1APPSET0

APPSET<x>, bit [x], for x = 31 to 0

Application trigger <x> enable.

Bits [31:N] are RAZ/WI. N is the number of ECT channels implemented as defined by the CTIDEVID.NUMCHAN field.

APPSET<x>Meaning
0b0

Reading this means the application trigger is inactive. Writing this has no effect.

0b1

Reading this means the application trigger is active. Writing this sets the corresponding application trigger to 1 and generates a channel event.

If the ECT does not support multicycle channel events, use of CTIAPPSET is deprecated and the debugger must only use CTIAPPPULSE.

The reset behavior of this field is:

Accessing CTIAPPSET

CTIAPPSET can be accessed through the external debug interface:

ComponentOffsetInstance
CTI0x014CTIAPPSET

This interface is accessible as follows:

AArch32 Registers
AArch64 Registers
AArch32 Instructions
AArch64 Instructions
Index by Encoding
External Registers
External Registers by Offset
Registers by Functional Group
Proprietary Notice

19/09/2024 21:51; f38fb98db05c9431684175106ec86e1bac8166e3

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.