AESENCWIDE256KL — Perform 14 Rounds of AES Encryption Flow With Key Locker on 8 BlocksUsing 256-Bit Key

Opcode/Instruction Op/En 64/32-bit Mode CPUID Feature Flag Description
F3 0F 38 D8 !(11):010:bbb AESENCWIDE256KL m512, <XMM0-7> A V/V AESKLE WIDE_KL Encrypt XMM0-7 using 256-bit AES key indicated by handle at m512 and store each resultant block back to its corresponding register.

Instruction Operand Encoding

Op/En Tuple Operand 1 Operands 2—9
A N/A ModRM:r/m (r) Implicit XMM0-7 (r, w)

Description

The AESENCWIDE256KL1 instruction performs 14 rounds of AES to encrypt each of the eight blocks in XMM0-7 using the 256-bit key indicated by the handle from the second operand. It replaces each input block in XMM0-7 with its corresponding encrypted block if the operation succeeds (e.g., does not run into a handle violation failure).

Operation

AESENCWIDE256KL

Handle := UnalignedLoad of 512 bit (SRC); // Load is not guaranteed to be atomic.
Illegal Handle = (
                HandleReservedBitSet (Handle) ||
                (Handle[0] AND (CPL > 0)) ||
                Handle [1] ||
                HandleKeyType (Handle) != HANDLE_KEY_TYPE_AES256
                );
IF (Illegal Handle)
    THEN RFLAGS.ZF := 1;
    ELSE
        (UnwrappedKey, Authentic) := UnwrapKeyAndAuthenticate512 (Handle[511:0], IWKey);
        IF (Authentic == 0)
            THEN RFLAGS.ZF := 1;
            ELSE
                    XMM0 := AES256Encrypt (XMM0, UnwrappedKey) ;
                    XMM1 := AES256Encrypt (XMM1, UnwrappedKey) ;
                    XMM2 := AES256Encrypt (XMM2, UnwrappedKey) ;
                    XMM3 := AES256Encrypt (XMM3, UnwrappedKey) ;
                    XMM4 := AES256Encrypt (XMM4, UnwrappedKey) ;
                    XMM5 := AES256Encrypt (XMM5, UnwrappedKey) ;
                    XMM6 := AES256Encrypt (XMM6, UnwrappedKey) ;
                    XMM7 := AES256Encrypt (XMM7, UnwrappedKey) ;
                    RFLAGS.ZF := 0;
        FI;
FI;
RFLAGS.OF, SF, AF, PF, CF := 0;
1. Further details on Key Locker and usage of this instruction can be found here:

https://software.intel.com/content/www/us/en/develop/download/intel-key-locker-specification.html.

Flags Affected

ZF is set to 0 if the operation succeeded and set to 1 if the operation failed due to a handle violation. The other arithmetic flags (OF, SF, AF, PF, CF) are cleared to 0.

Intel C/C++ Compiler Intrinsic Equivalent

AESENCWIDE256KLunsigned char _mm_aesencwide256kl_u8(__m128i odata[8], const __m128i idata[8], const void* h);

Exceptions (All Operating Modes)

#UD If the LOCK prefix is used.

If CPUID.07H:ECX.KL[bit 23] = 0.

If CR4.KL = 0.

If CPUID.19H:EBX.AESKLE[bit 0] = 0.

If CR0.EM = 1.

If CR4.OSFXSR = 0.

If CPUID.19H:EBX.WIDE_KL[bit 2] = 0.

#NM If CR0.TS = 1.

#PF If a page fault occurs.

#GP(0) If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit.

If the DS, ES, FS, or GS register is used to access memory and it contains a NULL segment selector.

If the memory address is in a non-canonical form.

#SS(0) If a memory operand effective address is outside the SS segment limit.

If a memory address referencing the SS segment is in a non-canonical form.