ETRACK — Activates EBLOCK Checks

Opcode/Instruction	Op/En	64/32 bit Mode Support	CPUID Feature Flag	Description
EAX = 0CH ENCLS[ETRACK]	IR	V/V	SGX1	This leaf function activates EBLOCK checks.

Instruction Operand Encoding ¶

Op/En	EAX		RCX
IR	ETRACK (In)	Return error code (Out)	Pointer to the SECS of the EPC page (In)

Description ¶

This leaf function provides the mechanism for hardware to track that software has completed the required TLB address clears successfully. The instruction can only be executed when the current privilege level is 0.

The content of RCX is an effective address of an EPC page.

The table below provides additional information on the memory parameter of ETRACK leaf function.

ETRACK Memory Parameter Semantics ¶

EPCPAGE

Read/Write access permitted by Enclave

The error codes are:

Error Code (see Table 38-4)	Description
No Error	ETRACK successful.
SGX_PREV_TRK_INCMPL	All processors did not complete the previous shoot-down sequence.

Table 38-45. ETRACK Return Value in RAX

Concurrency Restrictions ¶

Leaf	Parameter	Base Concurrency Restrictions
Leaf	Parameter		On Conflict
ETRACK ETRACK SECS [DS:RCX] Shared ETRACK SECS [DS:RCX]	SECS [DS:RCX]

Table 38-46. Base Concurrency Restrictions of ETRACK

Leaf	Parameter	Additional Concurrency Restrictions
		vs. EACCEPT, EACCEPTCOPY, EMODPE, EMODPR, EMODT		vs. EADD, EEXTEND, EINIT		vs. ETRACK, ETRACKC
		Access	On Conflict	Access	On Conflict	Access	On Conflict
ETRACK	SECS [DS:RCX]	Concurrent		Concurrent		Exclusive	SGX_EPC_PAGE _CONFLICT

Table 38-47. Additional Concurrency Restrictions of ETRACK

Operation ¶

IF (DS:RCX is not 4KByte Aligned)
    THEN #GP(0); FI;
IF (DS:RCX does not resolve within an EPC)
    THEN #PF(DS:RCX); FI;
(* Check concurrency with other Intel SGX instructions *)
IF (Other Intel SGX instructions using tracking facility on this SECS)
    THEN
        IF (<<VMX non-root operation>> AND <<ENABLE_EPC_VIRTUALIZATION_EXTENSIONS>>)
            THEN
                VMCS.Exit_reason := SGX_CONFLICT;
                VMCS.Exit_qualification.code := TRACKING_RESOURCE_CONFLICT;
                VMCS.Exit_qualification.error := 0;
                VMCS.Guest-physical_address := SECS(TMP_SECS).ENCLAVECONTEXT;
                VMCS.Guest-linear_address := 0;
            Deliver VMEXIT;
            ELSE
                #GP(0);
        FI;
FI;
IF (EPCM(DS:RCX). VALID = 0)
    THEN #PF(DS:RCX); FI;
IF (EPCM(DS:RCX).PT ≠ PT_SECS)
    THEN #PF(DS:RCX); FI;
(* All processors must have completed the previous tracking cycle*)
IF ( (DS:RCX).TRACKING ≠ 0) )
    THEN
        IF (<<VMX non-root operation>> AND <<ENABLE_EPC_VIRTUALIZATION_EXTENSIONS>>)
            THEN
                VMCS.Exit_reason := SGX_CONFLICT;
                VMCS.Exit_qualification.code := TRACKING_REFERENCE_CONFLICT;
                VMCS.Exit_qualification.error := 0;
                VMCS.Guest-physical_address := SECS(TMP_SECS).ENCLAVECONTEXT;
                VMCS.Guest-linear_address := 0;
            Deliver VMEXIT;
        FI;
    RFLAGS.ZF := 1;
        RAX := SGX_PREV_TRK_INCMPL;
        GOTO DONE;
    ELSE
        RAX := 0;
        RFLAGS.ZF := 0;
FI;
DONE:
RFLAGS.CF,PF,AF,OF,SF := 0;

Flags Affected ¶

Sets ZF if SECS is in use or invalid, otherwise cleared. Clears CF, PF, AF, OF, SF.

Protected Mode Exceptions ¶

#GP(0)	If a memory operand effective address is outside the DS segment limit.
	If a memory operand is not properly aligned.
	If another thread is concurrently using the tracking facility on this SECS.
#PF(error	code) If a page fault occurs in accessing memory operands.
#PF(error	If a memory operand is not an EPC page.

64-Bit Mode Exceptions ¶

#GP(0)	If a memory operand is non-canonical form.
	If a memory operand is not properly aligned.
	If the specified EPC resource is in use.
#PF(error	code) If a page fault occurs in accessing memory operands.
#PF(error	If a memory operand is not an EPC page.