TESTUI — Determine User Interrupt Flag

Opcode/Instruction	Op/En	64/32 bit Mode Support	CPUID Feature Flag	Description
F3 0F 01 ED TESTUI	ZO	V/I	UINTR	Copies the current value of UIF into EFLAGS.CF.

Instruction Operand Encoding ¶

Op/En	Tuple	Operand 1	Operand 2	Operand 3	Operand 4
ZO	N/A	N/A	N/A	N/A	N/A

TESTUI copies the current value of the user interrupt flag (UIF) into EFLAGS.CF. This instruction can be executed regardless of CPL.

TESTUI may be executed normally inside a transactional region.

Operation ¶

CF := UIF;
ZF := AF := OF := PF := SF := 0;

Flags Affected ¶

The ZF, OF, AF, PF, SF flags are cleared and the CF flags to the value of the user interrupt flag.

Protected Mode Exceptions ¶

#UD	The TESTUI instruction is not recognized in protected mode.

Real-Address Mode Exceptions ¶

#UD	The TESTUI instruction is not recognized in real-address mode.

Virtual-8086 Mode Exceptions ¶

#UD	The TESTUI instruction is not recognized in virtual-8086 mode.

Compatibility Mode Exceptions ¶

#UD	The TESTUI instruction is not recognized in compatibility mode.

64-Bit Mode Exceptions ¶

#UD	If the LOCK prefix is used.
	If executed inside an enclave.
	If CR4.UINTR = 0.
	If CPUID.07H.0H:EDX.UINTR[bit 5] = 0.